S6-A Automatic Gas Fire Extinguisher (6 kg) Clean Agent

The S6-A automatic gas fire extinguisher provides a professional solution for the continuous protection of enclosed, unattended rooms and technological spaces. The core of the device is a heat-sensitive glass bulb located in the built-in sprinkler nozzle: when the ambient temperature reaches a critical level, the bulb bursts, and the nitrogen propellant gas in the cylinder immediately spreads the clean extinguishing gas evenly over the fire source.

The HFC - SACLON 2 ECO extinguishing agent interrupts the chemical chain reaction of the fire. Since it is a completely clean gas, it evaporates completely without leaving any residue after extinguishing. It does not damage expensive IT hardware, fine mechanical devices, or paper documents, thus eliminating the severe secondary damages caused by powder or water extinguishers.

Areas of application: Server rooms, data centers, electrical switch cabinets, telephone exchanges, laboratories, museums, archives, and record rooms.

Installation recommendation: Mounted vertically on the ceiling or a fixed support structure, at a maximum height of 2 meters. A single 6 kg device can effectively cover a closed airspace of approximately 2 x 2 x 2 meters (approx. 8 m³). The built-in pressure gauge (manometer) on the cylinder allows visual checking of the device's readiness status at any time. The unit is refillable.

Product Properties / Parameters (for UNAS parameter table):

• Extinguishing agent type: Gas (HFC - SACLON 2 ECO)

• Extinguishing agent weight: 6 kg

• Fire classes: A, B (solid materials and flammable liquids)

• Activation temperature: between +65 °C and +68 °C

• Operating pressure (at 20 °C): 15 bar

• Test pressure: 25 bar

• Propellant gas: Nitrogen (N2)

• Cylinder volume: 9 liters

• Operating temperature range: -20 °C to +60 °C

• Extinguishing under voltage: Max. up to 1000 V (with a minimum safety distance of 1 meter)

• Certifications and standards: CE, EN3, B-39-00194-05

• Product width: 270 mm

• Product height: 280 mm

• Total weight: approx. 9.6 kg

• EAN code: 8594158877321

• Design: Refillable, constant pressure, equipped with a pressure gauge